Painting on metal, offering advice

[K-Maler]

Сообщение от Marina13

paint in these places was preserved. I need advice as to align the deformation without damaging the paint layer.

I give "artistic" sovet.Podumayte how to fix what's left and then save it as the original, it will have museum value. If it was desirable to "restore" for the church, it is best to print and finish in any material and size. Straighten impossible without spoiling everything. The surface of the metal for better adhesion previously rubbed garlic juice. He instigated and mold. This picture is not subject to restoration, because half of the painting is not, if will adds a gag ... We just build.

[nikola]

Сообщение от Marina13

I need advice as to align the deformation without damaging the paint layer. If someone faced with the - help, I will be grateful))))

Not only extremely professional artist will do painting on metal or the artist knows in advance that makes the "makeshift" That's why you should not bother is not an issue.
And if you strongly want. Necessary (as in the case with canvas) to glue on the paint layer of tissue paper. (isinglass) in this case the particles of paint remain on paper, and they can be restored to its original location.
In my opinion the cost of your items exactly 10-15 thousand rubles, and there is no point in applying so much work for the restoration.

[Кирилл Сызранский]

Сообщение от nikola

is not only extremely professional artist will do painting on metal

There are a lot of icons on the metal.
It is believed that this marine icons. Metal is not susceptible to moisture and frequent temperature fluctuations. But the icon was a utilitarian thing in those days, would have come into disrepair, would be replaced.

[Марина13]

It was a piece of the iconostasis, the Last Supper is always the royal Vratami.Seychas trying to find out how much tserkvi.Ya temple icons on a metal saw.

Deformations I straightened was applied to the paint layer is thick mastic that is not a big show, from top to put a flat piece of wood and a hammer tapping half an hour. Then the paste was removed and the paint on the spot, and hillocks was gone
Фоты later lay out

[Кирилл Сызранский]

Сообщение от Marina13

hillocks is gone

Cool.
Metal-Copper?

[Марина13]

No, zinc

[Черномашенцев Владимир]

Why did not you say? We think, are talking about steel thickness of 2-3 mm, and then talk about a plastic sheet of zinc thickness is likely to 1 mm.