Improved picture frames

[artcol]

Сообщение от Seriy

artcol,, bagetina 290 cm, 50x70=100 + 140 = 240, 8 corners, 10 cm = 80 cm, for a total of one bagetinu width of 10 cm does not fit.
50 divided by 8 = 6 cm

T e prints should be 6 cm wide, that 50x70 is not enough.
THEOREM schedule is still possible, and oil ... well, I do not know ..

50h55 you can see if the prints 10 cm

6 cm - more than normal.
For plastic.

[spigo]

Seriy, here is an economy option for diy, and you, as I understand, a little diy: buy a manual device for fastening the corners of frames-primernro 200-250 dollars., Staples, approximately 20 - 30 dollars. (full zhist enough) baguette, the "Derevyankin" it's called spliced molded from 20 rubles per meter, miter box for Chinese gash angles worth ok.20 long .. Well, with paint or other decorations, you and will understand.

[NATA NOVA]

Сообщение от spigo; 1443221"

buy a manual device for fastening the corners of frames-primernro 200-250 dollars.; Brackets around 20-30 dollars. (Full zhist enough), baguette, the "Derevyankin" it's called spliced Mouldings of 20 rubles per meter, miter box for Chinese gash angles ok.20 dollars worth .. But with painting or other decoration, and you will understand.

And yet such a tool to accurately cut .. 45 * In Gray Arte can see ..

[spigo]

Сообщение от NATA NOVA

And yet such a tool to exactly 45 *

So it is called, miter box (not to be confused with the mash)

[NATA NOVA]

Сообщение от spigo

So it is called, miter box (not to be confused with the mash)

I have successfully confused ..

But the picture has found: (All in one):

http://www.greatart.co.uk/framing-tools.html

[Seriy]

I'm here Napilil plastic molding, is now seeking a shop where you can cheaply bond angles. So far found 600 rubles, that is not appropriate.
If anyone knows an inexpensive bagetchika-shop, where such service can be done, I will be grateful for the advice!
or can tell-it-yourself forum bagetchikov have not found ..

[art-nova]

Сообщение от Seriy

I'm here Napilil plastic molding, is now seeking a shop where you can cheaply bond angles. So far found 600 rubles, that is not appropriate.
If anyone knows an inexpensive bagetchika-shop, where such service can be done, I will be grateful for the advice!
or can tell forum bagetchikov-until I found myself ..

here is a bit of baguette.

[Seriy]

art-nova, what I saw.
I have already bonded.
And the master said that the plastic molding can be glued "moments", just give him the first 10 minutes to dry out, then connect.

[art-nova]

Сообщение от Seriy

art-nova, what I saw. I have already bonded. And the master said that the plastic molding can be glued "moments", just give him the first 10 minutes to dry out, then connect.

In the shoe and furniture industry is the glue Nairi life time, so it will be better, but for Vera can and a couple of staples from the stapler.

[Кирилл Сызранский]

You can buy wood stapler.
There is the powerful staples, electrical.
Thousands and a half.