Two-edged sword

[Amateur]

Сообщение от Konstantin

is not clear what and where tolerated.
Straight from the picture is transferred paint? And then the painting itself goes bad? Or directly from tubes, the adjacent, take the paint? Then what increases?
Or from the air that something is generated? So why paint the pictures is generated immediately dollars or gold would be generated.
But looking at this example - something is not quite they did it.

Judging by the publications Nasibova, for example,
http://www.quantum-electron.ru/php/p...=159&lpage=162
(Can be downloaded as. Pdf), then until this is only a very primitive device, according to the principle of action reminiscent of the ink-jet printer. Only in the last drops of ink "spit" from the nozzle or piezo, or a rapid local heating and steam pressure, and then paint - in the same microscopic (!) Numbers - smacks of the pulsed laser beam of relatively high-powered carrier coated with this paint (see Fig.). Copying done by scanning a pinhole diaphragm (synchronously with the focusing lens) for semi-negative copy of the original, located in front is 100%reflecting mirror laser. (Laser power and, correspondingly, the density of paint at the same time, as necessary, will be lower for light areas of the original). The system is a bit like a TV beginning 1930. - With a spinning disk Nipkow. Colors are chosen conventional printing, oil paintings of speech do not exist. And it's hard to imagine that such a system could move in a reasonable time a lot of ink about 0,1 - 0,2 g /cm 2 - the approximate weight of the paint layer in the painting.

In general, while the artists get excited too early. Now, yes, and in the foreseeable future, this system is much inferior to even the domestic ink printers.