Вернуться   Форум по искусству и инвестициям в искусство > English forum > Art Kaleidoscope
 English | Русский Forum ARTinvestment.RU RSS Регистрация Дневники Справка Сообщество Сообщения за день Поиск

Art Kaleidoscope Interesting and relevant information about art. Discuss general art issues and any topics not covered in other forums. It’s only about art — love, politics, sports, hobbies etc. are discussed in “Chatter”.

Ответ
 
Опции темы Опции просмотра
Старый 01.12.2009, 14:57 Язык оригинала: Русский       #131
Старожил
 
Аватар для DSF
 
Регистрация: 05.07.2008
Адрес: Москва
Сообщений: 640
Спасибо: 3,711
Поблагодарили 1,572 раз(а) в 300 сообщениях
Репутация: 2835
По умолчанию

Fiber priming good latex paint, best Finnish, in at least two layers. This will be dragging the ground. It is possible to immediately write acrylic. If you paint in oils, painting will be dull. Therefore, oil is better prosohshuyu vodoemulsionku primed with one coat of alkyd enamel, or white, or tint desired. To dry day on the floor horizontally. Get a smooth, mirror-smooth poverhnost.Po it can freely write oil, enamel, or a combination thereof. This primer will virtually tyanet.Zhivopis with a wet sheen.



DSF вне форума   Ответить с цитированием
Этот пользователь сказал Спасибо DSF за это полезное сообщение:
NATA NOVA (01.12.2009)
Старый 01.12.2009, 15:57 Язык оригинала: Русский       #132
Гуру
 
Аватар для Seriy
 
Регистрация: 26.03.2009
Адрес: Москва-Киев
Сообщений: 7,078
Спасибо: 4,985
Поблагодарили 6,613 раз(а) в 2,177 сообщениях
Репутация: 12970
По умолчанию

I am acting in a similar way to the fiberboard. At the same time said that in Moscow, Leroy Merlin cutting fiberboard free.
Here is ready to work fiberboard with me, I also reverse primer, while adding blue dye, just like that, aesthetics.
Миниатюры
Нажмите на изображение для увеличения
Название: 1c5 056-1.jpg
Просмотров: 66
Размер:	39.1 Кб
ID:	510732  



Seriy вне форума   Ответить с цитированием
Эти 2 пользователя(ей) сказали Спасибо Seriy за это полезное сообщение:
DSF (01.12.2009), NATA NOVA (01.12.2009)
Старый 01.12.2009, 16:20 Язык оригинала: Русский       #133
Старожил
 
Аватар для DSF
 
Регистрация: 05.07.2008
Адрес: Москва
Сообщений: 640
Спасибо: 3,711
Поблагодарили 1,572 раз(а) в 300 сообщениях
Репутация: 2835
По умолчанию

Yes, he looks like. This system has long been tested.
I fiberboard itself is being cut to the desired size, and the reverse side are not affected, lazy .



DSF вне форума   Ответить с цитированием
Старый 01.12.2009, 16:32 Язык оригинала: Русский       #134
Гуру
 
Аватар для Pavel
 
Регистрация: 13.02.2009
Сообщений: 7,384
Спасибо: 3,976
Поблагодарили 4,028 раз(а) в 1,687 сообщениях
Репутация: -2
По умолчанию

Цитата:
Сообщение от DSF Посмотреть сообщение
Now look, this is an article from the magazine "Arts Council" 5 (51) 2006.
Fiber I use because I need a flat surface, texture of the canvas does not suit me. Question with sagging large easily solved, the size of more than 1 meter, I stuffed in the frame, less meter - just insert into the frame. The only drawback Fibreboard - is its weight, a large painting with a subframe rather difficult. But transportation is no problem.
I have seen composite pictures, written on pieces of hardboard size of 1.5 m (width) by 2.5 m (height), stuffed to the stretcher. The total size of the picture - from 3 to 5.5 m on the long side. The picture is from 30 to 40 years. They are perfectly preserved. Stand at the wall in the artist's studio.
And it will still be standing.



Pavel вне форума   Ответить с цитированием
Этот пользователь сказал Спасибо Pavel за это полезное сообщение:
DSF (01.12.2009)
Старый 01.12.2009, 16:40 Язык оригинала: Русский       #135
Гуру
 
Аватар для Seriy
 
Регистрация: 26.03.2009
Адрес: Москва-Киев
Сообщений: 7,078
Спасибо: 4,985
Поблагодарили 6,613 раз(а) в 2,177 сообщениях
Репутация: 12970
По умолчанию

Цитата:
Сообщение от DSF Посмотреть сообщение
Yes, and looks. This system has long been tested.
I fiberboard itself is being cut to the desired size, and the reverse side are not affected, lazy .
I think it is important not only to prime the reverse, but the slices. Thus fluctuations of humidity from the outside will not affect the moisture content fiberboard. The composition of the soil for the face and I have different turnover. In turn, almost pure PVA, almost akrilshpaklevki and paints, just to see the places covered, and where yet.



Seriy вне форума   Ответить с цитированием
Эти 2 пользователя(ей) сказали Спасибо Seriy за это полезное сообщение:
DSF (01.12.2009), NATA NOVA (01.12.2009)
Старый 01.12.2009, 16:41 Язык оригинала: Русский       #136
Гуру
 
Аватар для K-Maler
 
Регистрация: 02.02.2009
Сообщений: 4,625
Спасибо: 9,569
Поблагодарили 3,691 раз(а) в 1,700 сообщениях
Записей в дневнике: 4
Репутация: 6499
По умолчанию

Цитата:
Сообщение от DSF Посмотреть сообщение
So for better oil already prosohshuyu vodoemulsionku primed with one coat of alkyd enamel, or white, or tint desired.
! Here, in some cases may get an error: soil in all cases should slightly pull for adhesion of the paint layer with the base. If not, the paint dried, compressed and fall off from the ground. Some times Repin museum paintings have these problems because of too oily soil (it is not pulling at all). Masonite enough glue twice gelatin (50gr per liter).



K-Maler вне форума   Ответить с цитированием
Этот пользователь сказал Спасибо K-Maler за это полезное сообщение:
DSF (01.12.2009)
Старый 01.12.2009, 16:50 Язык оригинала: Русский       #137
Гуру
 
Аватар для Seriy
 
Регистрация: 26.03.2009
Адрес: Москва-Киев
Сообщений: 7,078
Спасибо: 4,985
Поблагодарили 6,613 раз(а) в 2,177 сообщениях
Репутация: 12970
По умолчанию

K-Maler, is a double-edged sword, will tyanushim-pull all the oil paint dry up and may even crumble, as are dry. Very netyanuschy-type alkyd whitewash cover - juicy paint, glitter, but you're afraid, as if under some circumstances, not all went off as a film. Although if we take an example from everyday life, how many times the window frames were painted with whitewash-dozen? a layer from the layer does not peel off, often the entire layer of paint moves away from the tree, with extremes of temperature and humidity.



Seriy вне форума   Ответить с цитированием
Этот пользователь сказал Спасибо Seriy за это полезное сообщение:
DSF (01.12.2009)
Старый 01.12.2009, 17:14 Язык оригинала: Русский       #138
Старожил
 
Аватар для DSF
 
Регистрация: 05.07.2008
Адрес: Москва
Сообщений: 640
Спасибо: 3,711
Поблагодарили 1,572 раз(а) в 300 сообщениях
Репутация: 2835
По умолчанию

Цитата:
Сообщение от K-Maler Посмотреть сообщение
! Here, in some cases may get an error: soil in all cases should slightly pull for adhesion of the paint layer with the base.
This soil is slightly pulling. Strength is obtained very prochnym.Provereno years.
Цитата:
Сообщение от Pavel Посмотреть сообщение
And it will still be standing.
Agree. First, the size of 2.3 to 4.5 meters to sell itself problematic. It is hard on the amateur. Secondly, they were written mostly in the 70's and appropriate topics for large Soviet exhibitions. While one of them was moved to Spain in the early 90's and sold there. Others still are.



DSF вне форума   Ответить с цитированием
Старый 01.12.2009, 17:15 Язык оригинала: Русский       #139
Гуру
 
Аватар для Кирилл Сызранский
 
Регистрация: 26.07.2008
Адрес: РФ, Самара
Сообщений: 75,465
Спасибо: 27,923
Поблагодарили 55,361 раз(а) в 24,302 сообщениях
Записей в дневнике: 133
Репутация: 102421
Отправить сообщение для Кирилл Сызранский с помощью Skype™
По умолчанию

Цитата:
Сообщение от Seriy Посмотреть сообщение
would tyanushim-pull all the oil
This is how to pull the ground that all the oil from the paint in the ground gone? Not pulling the ground pulls, but not the same.

Added after 1 minutes
Цитата:
Сообщение от DSF Посмотреть сообщение
The others are standing.
do not dill, did not wilt.




Последний раз редактировалось Кирилл Сызранский; 01.12.2009 в 17:17. Причина: Добавлено сообщение
Кирилл Сызранский вне форума   Ответить с цитированием
Этот пользователь сказал Спасибо Кирилл Сызранский за это полезное сообщение:
DSF (01.12.2009)
Старый 01.12.2009, 18:02 Язык оригинала: Русский       #140
Гуру
 
Аватар для Seriy
 
Регистрация: 26.03.2009
Адрес: Москва-Киев
Сообщений: 7,078
Спасибо: 4,985
Поблагодарили 6,613 раз(а) в 2,177 сообщениях
Репутация: 12970
По умолчанию

Cyril Syzransky, for sure. I have already quoted the example of works from the collection of Pinot. Another depends on the color-soot gas somehow worse than holding oil than white and ocher.



Seriy вне форума   Ответить с цитированием
Ответ


Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Разделы Ответов Последние сообщения
Esoterica in painting Konstantin Art Kaleidoscope 63 01.02.2011 18:01
Restoration of oil painting 19 century NATA NOVA Restoration 27 12.08.2009 21:21
What's the technique? tyatin Costs, valuation, attribution 11 29.03.2009 10:12
Bible in art nikola Chatter 0 21.01.2009 23:05
Engineering an oil painting and preservation of paintings Art Kaleidoscope 0 01.01.1970 03:00





Часовой пояс GMT +3, время: 05:38.
Telegram - Обратная связь - Обработка персональных данных - Архив - Вверх


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd. Перевод: zCarot